Carver Equipment, Hwy 301 South, Dunn, NC  28334
                                          910-892-7171    910-891-7171(fax)  Map to our location.
 Click to return to HOME

Carver, Carver Equip, Carver Equipment Co., Dunn NC, Dunn, Dunn North Carolina, Steve Carver, Carver Kubota,  Kubota Tractor, Kubota Tractor,  Kawasaki, Kawa, Kawasaki ATV, ATV, Mule, Mules, Kawasaki Mule, Gehl, TCM, TCM Loaders, TCM parts, Kubota parts, Kioti Parts, Kubota RTV900, RTV900, Kubota BX24, BX24, Kubota BX1850, Kubota BX2350, Toothbar, WR Long, WR Long Toothbar, Long, Befco, Befco Implements, First Choice, First Choice Implements, Snow Chains, Chains, Generators, PTO Generators, Used Tractors, Used, Used Loaders, Used Backhoes, Gehl Parts, JLG, JLG Parts, Kubota ZD mowers, Kubota mowers, Kubota B21, Kubota L39, Kubota L48, 610, 3010, Mule 610, Mule 3010, Transporter, Mule Transporter, B3030, L3010, DK35, DK45, DK55, CK25, CK30, Kaboat, Kabota Tractors, Kobota, Kobota Tractors dealer

Measure carefully .... The "devil's in these details."

When you are determining the final package and specs you desire in a tractor and implement package.  Remember to remind us to personally go PUT THE TAPE MEASURER on the actual tractor.  Remember to remind us to tell you the "real measurements," right off the tractor you are considering.  You must do your "homework" and give us the measurements at your garage, doors, gates, trailers, space between trees, etc.

Best wishes,
Steve

Tractor Overall Length (without lift arms) ...   is the measurement from the front (Forward-most) point on the tractor (not counting a grille guard) to the rear (furthest point) with exception of the three point hitch rear lift arms.  This dimension is important for folks that ship or store the tractors in the  shortest space possible.  The three point lifts arms are easily removed by  simply removing several clip pins.  The three point lift arms usually add 8"  to 11" to the overall length.  You cannot however take it for granted because different size tires will change the overall length measurement.

Tractor Overall Length (with lift arms) ...   is the measurement from the front (Forward-most) point on the tractor (not counting a grille guard) to the rear (furthest point) which is usually the tip of the three point hitch lift arms.

You cannot however take it for granted because different size tires will change the overall length measurement.

Overall length has nothing to do with the measurements of implements attached to the three point hitch, loaders-buckets, front mounted snow blowers or blades/plows.


Tractor Minimum Width     ...  with the smallest (most narrow) tires installed, and the wheels set in the most narrow positions on the axle hubs...... min. width is the measurement from the outside of the tractor on one side -- to -- the outside of the tractor on the other side at it's widest point.

This has nothing to do with the measurements of implements attached to the three point hitch, loaders-buckets, front mounted snow blowers or blades/plows and/or mid mounted mowers.


Tractor Overall Width ...  with the "standard equipment" tires installed, and the wheels set in the most narrow positions on the axle hubs...... OVERALL WIDTH is the measurement from the outside of the tractor on one side -- to -- the outside of the tractor on the other side at it's widest point.

This has nothing to do with the measurements of implements attached to the three point hitch, loaders-buckets, front mounted snow blowers or blades/plows and/or mid mounted mowers.

Wheelbase is the distance from the center of the front tire/wheel to the center of the rear tire/wheel.  Wheelbase never changes. No matter what size tires or wheels settings you have.
The wheelbase is usually a little different (1"- 3") when comparing 2wd and 4wd.